1.Please apply different IP rate products according to different environmental conditions; 2.Notice no damage to the PCB's circuit under installation; 3.Adopt suitable power supply to match the led strips. Power is 20% bigger than max.power of led strips to ensure the long time performance of power supply; 4.Forbid to install it when power on. Before power on ,please make sure that wiring is correct once installation finished; 5.In order to get the best lighting effect and no damage. Max.continuous length is 10 meters; 6.Please do not stare at the light for a long time when it is working to protect your eyes; 7.Only professional personnel may dismantle and repair.
1.SMD3528, a variety of chips can be selected (Epistar / Osram / Cree / Nichia); 2. FPC adopts double-sided rolled copper, bending strength, bending resistance, carrying high current; 3. Low light decline, good heat dissipation, long lifespan (>50,000hours); 4. CE/RoHS/UL certified, 5 years warranty. 5. Cutting unit:50 mm
1.Decorative lighting for hotel, KTV, etc 2.Backlight for edge lighting/signage lighting 3.LED appearance/scene lighting 4.Holiday decorative lights, display and exhibition lighting 5.Residential or public facilities*Note: The above date is based on the color temperature of 4000K monochrome.| Installation of clips | |||
| 1. Use screws to fix the clips on the mounting position.(*3 clips can be used for 1meter) | |||
|
|  | ||
| Installation of carriers | |||
| If the LED strip exceeds 2meters, it’s recommended to install by two persons. | ||
 |  |  | |
| If the LED strip exceeds 2meters, it’s recommended to disassemble by two persons. | ||
 |  |  | |
| ※ Please drive the led strip with required isolated power, and the ripple of the constant voltage source should be less than 5%. ※ Please do not bend the strip into an arc with a diameter less than 60mm to ensure the longevity and reliability. ※ Do not fold it in case any damage of LED beads. ※ Do not pull the power wire hard to ensure the longevity. Any Crash may damage the LED light is prohibited. ※ Please make sure the wire is connected to the anode and cathode correctly. The power output should be consistent with the voltage of the strip to avoid damage. ※ LED lights should be stored in dry, sealed environment. Please only unpack it before usage. Ambient temperature: -25℃~40℃. Storage temperature: 0℃~60℃.Please use the strips without waterproof within indoor environment with humidity less than 70%. ※ Please be careful during operation. Do not touch the AC power supply in case of electric shock. ※ Please leave at least 20% power for the power supply during using to ensure there is enough power supply to drive the product. ※ Do not use any acid or alkaline adhesives to fix the product (e.g.: glass cement). | |||
 |  |  | |
|
| No Stretching | No Trampling | |